1998 - 2002

Technological Institute of The Philippines

Bachelor of Science in Chemical Engineering

2004 - 2010

University of the Philippines, Los Banos

Master's Degree Chemical Engineering minor in Agricultural Engineering

2022 ~ 2023

Dispatched to CHIYODA CORPORATION thru ENIGINEER NETWORK INC.

2005 ~ 2022

JGC Phillippines

1. JGC Yokohama <2017 - 2018> and <2010 - 2011>
2. JGC GASCO IGD Habshan-5 Project Construction Site, Abu Dhabi, UAE <2012 - 2013>
3. JGC PETRO RABIGH Project Construction Site, Saudi Arabia <2007 - 2008>
4. Factory Acceptance Test, YEA , Singapore <2011> and <2006 - 2007>

Instrumentation and Control Engineer

Dispatched to CHIYODA CORPORATION thru ENIGINEER NETWORK INC. <2022 - present>

Projects Involved:

• North Field East Qatar Mega LNG Project

Primary Responsibilities (as Lead Engineer):

• Mainly engaged in construction engineering.
  Manages hook-up related activities, including Air, Impulse, Trace and Analyzer installations, ensuring strict adherence to requirements. Methodically checks and verifies consistency in 3D and P&ID. Ensuring that materials used are compatible to application services.

Lead Engineer for Valves

JGC Philippines Inc. <2022>

Projects Involved:

• Zuluf, Saudi Aramco /JGC Gulf Engineering

Primary Responsibilities:

• Lead the activities for Valves.

 
 

Assistant Lead Engineer

JGC Philippines Inc. ＜2020 - 2022＞

Projects Involved:

• South Ghawar Project, Saudi Aramco /JGC Gulf Engineering

Primary Responsibilities:

• Lead the activities for Field Instruments and Instrument Database. Includes preparation and checking of Specifications, Technical Bid Evaluation, and Vendor Document Review and Approval (i.e., for Guided Wave Radar, FGS Devices, Corrosion Probes and Transmitters, Pressure Gauges, Electronic Transmitters and Temperature Instruments)

 
 

Lead Engineer

JGC Philippines Inc. ＜2018 - 2020＞

Project Involved:

• Palayan Bayan Project & D&L Premium Foods/Natura.

Primary Responsibilities:

• Instrument in charge for Proposal Estimation (i.e., Planning, inter-discipline Coordination and preparation of deliverables)
• Lead Instrument’s Project Execution for this 1st Food Plant Engineering Design.

 
 

Engineer

JGC Philippines Inc. ＜2016 - 2018＞

Project Involved:

• Hassi Messaoud, Algeria Project at JPI Office in Yokohama Japan

Primary Responsibilities:

• Responsible for Valve detailed design, Vendor evaluation and selection (i.e., On-Off Valves, Control Valves, Hydraulic and Wellhead Valves)
• Supported the project in executing Control Systems (1371) related activities (e.g., Schedules, Deliverables, Planning for Factory Acceptance Test.
• Co-lead the Factory Acceptance Test in Pune, India from April to June 2018.

 
 

Assistant Lead Engineer

JGC Philippines Inc. ＜2013 - 2016＞

Project Involved:

• Jazan Refinery Terminal PJ, KSA

Primary Responsibilities:

• Lead the Instrument Database activities in SPI as well as review and check of P&ID and revision control. Preparation for Instrument Connection List (Wiring), Loop Drawings and Segment Diagram in SPI.

ICSS Engineer

JGC Philippines Inc.  <2010 - 2013＞

Projects Involved:

• GASCO IGD Habshan-5 PJ, Abu Dhabi, UAE

Primary Responsibilities:

Please see below；

1. PJ CONSTRUCTION SITE, ABU DHABI UAE (2012 - 2013)
   ICSS Engineer-in-charge for PCS-related activities. Handles Site Acceptance Test (SAT), Supervised Loop Check, and Functionality Check and supports to Pre-commissioning activities. Coordination work within the Instrument Section, with other disciplines and Subcontractors for manpower, schedule, and look-ahead activities, and with other Contractors (Tecnimont/Hyundai) for interface-related work.
2. FACTORY ACCEPTANCE TEST (FAT), YEA, SINGAPORE (2011)
   Responsible for checking and approval of Safety Control Systems (ESD, BMS & FGS) Logic. Supervised work schedules and activities to meet the target completion date. Coordination with Clients, other EPCs, and other engineering disciplines on revisions in design documents and technical information.
   
3. ENGINEERING STAGE, JGC YOKOHAMA OFFICE, JAPAN (2010 - 2011)
   Person-in-charge for Safety Control Systems (ESD, BMS & FGS). Coordination with ICSS Vendor and other engineering disciplines (mainly with Process, Fire, and Building Team) on design documents and technical information. Responsible for reviewing and checking ESD and FGS Cause and effect Documents and Vendor documents approval.

 
 

ICSS Engineer

JGC Philippines Inc.  <2005 - 2008＞

Projects Involved:

• PETRO RABIGH PJ, Saudi Aramco / Sumitomo PJ

Primary Responsibilities:

Please see below；

1. PJ CONSTRUCTION SITE, KSA (2007 - 2008)
   ICSS Engineer-in-charge for PCS-related activities. Handles Site Acceptance Test (SAT), Supervised Loop Check, and Functionality Check and supports Pre-commissioning activities.
   
2. FACTORY ACCEPTANCE TEST (FAT), YEA, SINGAPORE (2006 - 2007)
   Engineer in charge for Safety Instrument Systems (SIS). Check and approval for Hardware and Software check
   
3. ENGINEERING STAGE (2005 - 2006)
   As a Cadet Engineer. Assisted the team in Instrument Database activities and field instruments